Prettau® 2 Dispersive® 



Particularly translucent and bend resistant zirconia with natural colour gradient
available now!


The Prettau® Bridge has been used for patients all over the world for 10 years now. Tens of thousands of structures have been skilfully coloured by hand and refined individually for each patient.

All these experiences have been integrated into the development of the new Prettau® 2 Dispersive® zirconia. The result is a particularly translucent, extremely bending resistant zirconia which is provided with a natural colour shading already during the manufacturing process. In order to achieve a particularly smooth shade transition after the sintering process, it is important that the colours are not distributed in layers, but finely scattered.

Depending on the aesthetic requirements, the structures can also be further individualised by manually applying Colour Liquids, ceramics or stains. The biocompatible zirconia that can be designed monolithically or reduced, is suitable for both single crowns as well as full arch bridges.

For a material-identical determination of the patient's tooth colour, special zirconia shade guides with sample teeth made of Prettau® 2 Dispersive® are available for the upper, lower and posterior region.  If the material of the shade guide and the material of the zirconia crown are identical, it is ensured that the colour of the zirconia restoration corresponds 1:1 with the natural tooth colour of the patient.
 

Properties at a glance:


  • Pre-coloured zirconia with natural colour gradient, excellent flexural strength and particularly high translucency
  • Merging colour gradient that reproduces the natural tooth colours from dentine to enamel, colour scheme from A1-D4
  • Manual colouring with Colour Liquids is not required any more, but it can be used to achieve a more patient specific result
  • No limitations! Especially suitable for full arch restorations but also for single crowns, inlays, onlays, veneers and bridges with up to 14 elements, occlusally screwed or cemented (fully anatomical or reduced for veneering with ICE Zirkon Ceramics)
  • No ceramic chipping (thanks to the fully anatomical design)
  • No abrasion to the antagonist
  • After sintering, the restoration can be personalised with ICE Zirkon Stains Prettau® and ICE Zirkon 3D Stains by Enrico Stege
 

Processing:


  • CAM-dry processing
  • Sintering (1600 °C)
  • Glaze with 3D Glaze Base, Glaze Plus or New: Glaze Fluo for a natural fluorescence
  • High gloss polishing
  • Insertion: Cementation or screwing
 

Optional processing:


 

Comparison of the characteristics:


_________________ _________________ _________________ _________________ _________________ _________________
PRETTAU® PRETTAU® PRETTAU® PRETTAU® PRETTAU® PRETTAU®
  2 2 3 4 4
    DISPERSIVE® DISPERSIVE® ANTERIOR® ANTERIOR®
DISPERSIVE®
_________________ _________________ _________________ _________________ _________________ _________________
Translucency Translucency Translucency Translucency Translucency Translucency
_________________ _________________ _________________ _________________ _________________ _________________
Flexural strength Flexural strength Flexural strength Flexural strength Flexural strength Flexural strength
_________________ _________________ _________________ _________________ _________________ _________________
      Gradual-Triplex-Technology*    
           
Without colour gradient Without colour gradient With colour gradient With colour gradient Without colour gradient With colour gradient
           
Without bending strength gradient Without bending strength gradient Without bending strength gradient With bending strength gradient Without bending strength gradient Without bending strength gradient
           
Without translucency gradient Without translucency gradient Without translucency gradient With translucency gradient Without translucency gradient Without translucency gradient
_________________ _________________ _________________ _________________ _________________ _________________
Individual colouring
with Colour Liquids
Individual colouring
with Colour Liquids
Optional: Individualisation
with Colour Liquid
Intensiv
Optional: Individualisation
with Colour Liquid
Intensiv
Individual colouring
with Colour Liquids
Optional: Individualisation
with Colour Liquid
Intensiv
_________________ _________________ _________________ _________________ _________________ _________________
Sintering temperature Sintering temperature Sintering temperature Sintering temperature Sintering temperature Sintering temperature
1600 °C 1600 °C 1600 °C 1500 °C 1500 °C 1500 °C
_________________ _________________ _________________ _________________ _________________ _________________
Monolithic design in
the posterior area possible
Monolithic design in
the anterior area and
in the posterior area possible
Monolithic design in
the anterior area and
in the posterior area possible
Monolithic design in
the anterior area and
in the posterior area possible
Monolithic design in
the anterior area and
in the posterior area possible
Monolithic design in
the anterior area and
in the posterior area possible
_________________ _________________ _________________ _________________ _________________ _________________
           
*Gradual-Triplex-Technology: The zirconia is already provided with colour, translucency and bending strength gradients during the production process. This results in a natural colouring, a highly translucent cutting edge and an extremely high bending strength at the tooth neck.
 
 

Indications:


PRETTAU® PRETTAU® PRETTAU® PRETTAU® PRETTAU® PRETTAU®
  2 2 3 4 4
    DISPERSIVE® DISPERSIVE® ANTERIOR® ANTERIOR®
DISPERSIVE®
_________________ _________________ _________________ _________________ _________________ _________________
Copings Copings Copings Copings Copings Copings
_________________ _________________ _________________ _________________ _________________ _________________
Inlay, Onlay, Veneer Inlay, Onlay, Veneer Inlay, Onlay, Veneer Inlay, Onlay, Veneer Inlay, Onlay, Veneer Inlay, Onlay, Veneer
_________________ _________________ _________________ _________________ _________________ _________________
Crowns Crowns Crowns Crowns Crowns Crowns
_________________ _________________ _________________ _________________ _________________ _________________
Max. three-unit
bridges
Max. three-unit
bridges
Max. three-unit
bridges
Max. three-unit
bridges
Max. three-unit
bridges
Max. three-unit
bridges
_________________ _________________ _________________ _________________ _________________ _________________
Multiple-unit bridge Multiple-unit bridge Multiple-unit bridge Multiple-unit bridge    
   
_________________ _________________ _________________ _________________ _________________ _________________
Circular bridges Circular bridges Circular bridges Circular bridges    
   
           
           

Studia


Studia

więcej...
 

Prettau® 2 Dispersive®


Prettau® 2 Dispersive® A2 95H14


Paczka zawiera:
1 szt.
Numer katalogowy:
ZRKC8021A02
Kolor:

Wysokość:
Systemu / średnica:


Particularly translucent and bending resistant zirconia with natural colour gradient for single crowns up to large-span bridges (full contour restorations or reduced structures for ceramic layering)

Elaboration with CAD/CAM milling bur Zirconia


Prettau® 2 Dispersive® Bleach 0M1 95H16


Paczka zawiera:
1 szt.
Numer katalogowy:
ZRKC80310M1
Kolor:

Wysokość:
Systemu / średnica:


Particularly translucent and bending resistant zirconia with natural colour gradient for single crowns up to large-span bridges (full contour restorations or reduced structures for ceramic layering)

Elaboration with CAD/CAM milling bur Zirconia


Prettau® 2 Dispersive® A2 16er


Paczka zawiera:
1 szt.
Numer katalogowy:
ZRKC0701A02
Kolor:

Rozmiar:
Systemu / średnica:


Particularly translucent and bending resistant zirconia with natural colour gradient for single crowns up to large-span bridges (full contour restorations or reduced structures for ceramic layering)