NOWOSCM2 Dual Teleskoper milling unit


Overview of the characteristics 


  • Computer-controlled two-chamber milling unit with Teleskoper Orbit ⌀ 125 mm in the left milling chamber and orbit ⌀ 95 mm in the right milling chamber
  • Separate milling chambers enable sequential wet and dry processing of the materials without manual in-between cleaning
  • Stand-alone solution: Integrated PC with touch screen for direct control (loading of tools, controlling of milling and calibration processes)
  • Fully automated 5+1 axis simultaneous milling technology
  • The following blanks can be inserted (for some, holders are required): Material blanks with ⌀ 95 mm, ⌀ 98 mm, ⌀ 106 mm and ⌀ 125 mm as well as up to 13 glass-ceramic and up to 9 Raw-Abutment® blanks
  • The blanks can be removed from the orbit and allow a high-precision repositioning in μm range when re-inserted
  • High-performance milling spindle with optimised cooling water supply for particularly gentle material elaboration
  • With wet processing function for processing all common dental materials and kinds of restorations (zirconia, resin, wax, Sintermetall, cobalt-chrome, titanium, Raw-Abutments®, glass-ceramics and composite)
  • CAD/CAM milling bur 6 mm and orbit with opposed rotary axes (A and B) for a stable elaboration process; elaboration time can be varied by selecting different surface qualities
  • Spaciously designed, optimally illuminated and easily accessible milling chambers
  • Contamination-protected tool chamber separated from the milling chambers, with automatic 21-compartment tool changer function and space for up to two additional tool magazines with 21 tool slots each (3x21); up to 63 tool slots
  • Optical tool detection for a secure selection of the suitable milling tools
  • Automatic self-cleaning and drying function and Cleaning Kit for manual cleaning

M2/M2 DUAL UPGRADE KIT
The M2 Dual Teleskoper milling unit can be upgraded to the M2 Dual Double Teleskoper milling unit by integrating an additional Teleskoper Orbit ⌀ 125 mm. This enables the elaboration of material blanks with a diameter of ⌀ 95 mm, ⌀ 98 mm, ⌀ 106 mm and ⌀ 125 mm. It also increases the number of glass-ceramic and Raw-Abutment® blanks that can be elaborated in one milling process.

Accessories 


  Nowosc! Tool magazine D6
with 21 tool slots for the storage and organisation of tools

Numer katalogowy: ZBAC4201
  Nowosc! Ioniser M2 / M2 Dual right
Device for the electrostatic discharge of plastic shavings for more cleanliness during the milling process

Numer katalogowy: ZBAC3321
  Raw-Abutment® Holder
Holder for fixing and for the serial processing of up to three prefabricated titanium abutment blanks (Raw-Abutments®) in the Zirkonzahn milling unit with ⌀ 95 mm orbit

Numer katalogowy: ZBAC1691
  Glass Ceramics Holder
Holder for fixing and for the serial processing of up to four glass ceramic blanks in the Zirkonzahn milling unit with ⌀ 95 mm orbit

Numer katalogowy: ZBAC1651   
  JawPositioner Support
Support used to fix the JawPositioner into the orbit of the Zirkonzahn milling unit

Numer katalogowy: ZBAC3511
  Nowosc! Blank Holder ⌀ 95 Teleskoper
Holder for fixing material blanks with a diameter of ⌀ 95 mm, for exchange in combination with Teleskoper Orbit

Numer katalogowy: ZBAC2850
  Nowosc! Blank Holder ⌀ 98 Teleskoper
Holder for fixing material blanks with a diameter of ⌀ 98 mm in combination with Teleskoper Orbit

Numer katalogowy: ZBAC2830
  Nowosc! Blank Holder ⌀ 106 Teleskoper
Holder for fixing material blanks with a diameter of ⌀ 106 mm in combination with Teleskoper Orbit

Numer katalogowy: ZBAC2840
  Nowosc! Raw-Abutment® Holder 6 Teleskoper
Holder for fixing and for the serial processing of up to six prefabricated titanium abutment blanks (Raw-Abutments®), in combination with Teleskoper Orbit

Numer katalogowy: ZBAC2800
  Nowosc! Glass Ceramics Holder 9 Teleskoper
Holder for fixing and for the serial processing of up to nine glass-ceramic blanks, in combination with Teleskoper Orbit

Numer katalogowy: ZBAC2820  

 

Processable materials 


 
 Zirconia  Resin  Wax  Wood  Sinter
 metal
 Chrome-
 Cobalt
 Titanium  Raw-
 Abutment®
 Glass
 ceramics
 Composite

Technical specifications 


 

Weight 240 kg

Width 125 cm + 14 cm Cleaning Kit

Height 69 cm

Depth 62 cm

Casing Hardened Securit glass UNI ISO 12150

Processing axes 5+1

Power capacity 600 W

Operating voltage 100 – 240V

Power input 2.6 A (5.5 A)

Chuck ⌀ 6 mm

Spindle speed Depending on equipment

Torque 13 Ncm

Orbit 1x Orbit ⌀ 95 mm, 1x Teleskoper Orbit ⌀ 125 mm

Workpieces
(some with special holders
at extra charge):
2x material blanks ⌀ 95 mm, 1x material blank ⌀ 98 mm, 106 mm, 125 mm, up to 9 prefabricated titanium abutment blanks (Raw-Abutments®), up to 13 glass-ceramic blanks, JawPositioner transfer pattern

Więcej informacji i akcesoriów 


 
     
Zakres aplikacji   Software   Materiały do frezowania   Akcesoria