Prettau® 3 Dispersive® - Zirconia with triple gradient 



Zirconia with Gradual-Triplex Technology: natural colour gradient, extremely high bending strength and highly translucent cutting edge – available now!


Our Prettau® Dispersive® zirconia materials are provided with a gentle and natural colour shading already during the manufacturing process thanks to a smooth, dispersive shade transition. With the new Prettau® 3 Dispersive® zirconia, we have now developed a zirconia material with a triple gradient by using the Gradual-Triplex-Technology. In addition to the colouring, also translucency and bending strength levels change. While the incisally increasing translucency results in a highly translucent incisal edge, the cervically increasing flexural strength results in an extremely high flexural strength at the tooth neck. Accordingly, Prettau® 3 Dispersive® can be used for all kinds of zirconia restorations, although it is particularly suitable for monolithic restorations. For a material-identical determination of the patient's tooth colour, special zirconia shade guides with sample teeth made of Prettau® 3 Dispersive® are available for the upper, lower and posterior region.  If the material of the shade guide and the material of the zirconia crown are identical, it is ensured that the colour of the zirconia restoration corresponds 1:1 with the natural tooth colour of the patient.

 

Properties at a glance:


  • Zirconia with Gradual-Triplex Technology: Triple gradient with natural colouring as well as increasing bending strength and translucency values
    • Cervically increasing flexural strength; extremely high flexural strength at the neck of the tooth
    • Incisally increasing translucency; highly translucent incisal edge
    • Merging colour gradient that reproduces the natural tooth colours from dentine to enamel
 
  ~ 670 MPa*
   
  ~ 1100 MPa*
   
  ~ 1200 MPa*
      Bending strength gradient Translucency gradient Colour gradient Final result
  * Average value of the biaxial bending strength from several test series 
 
  • Colour scheme from A1-D4 as well as 3 Bleach shades; special zirconia shade guides for upper and lower anteriors, posteriors and with minimal cutback available
  • Manual colouring with Colour Liquids is not required anymore, but can be done with Colour Liquid Prettau® Aquarell intensive colours to achieve a more patient-specific result
  • No limitations! Can be used for single crowns, inlays, onlays, veneers, bars and multi-unit bridges (reduced or fully anatomical), especially suitable for monolithic design
  • Fast sintering of single crowns possible
  • No ceramic chipping (thanks to the full anatomical design)
  • Personalisation after sintering with ICE Stains Prettau® and ICE Stains 3D by Enrico Steger
 

Processing:


  • Placing the designed structure in the Zirkonzahn.Nesting software according to the displayed colour gradient
  • CAM-dry processing
  • Sintering (1500 °C); fast sintering of single crowns possible
  • Glazing with 3D Glaze Base, Glaze Plus
  • High gloss polishing
  • Insertion: Cementation or screwing
     
 

Optional processing:


   
 

Comparison of the characteristics:


_________________ _________________ _________________ _________________ _________________ _________________
PRETTAU® PRETTAU® PRETTAU® PRETTAU® PRETTAU® PRETTAU®
  2 2 3 4 4
    DISPERSIVE® DISPERSIVE® ANTERIOR® ANTERIOR®
DISPERSIVE®
_________________ _________________ _________________ _________________ _________________ _________________
Translucency Translucency Translucency Translucency Translucency Translucency
_________________ _________________ _________________ _________________ _________________ _________________
Flexural strength Flexural strength Flexural strength Flexural strength Flexural strength Flexural strength
_________________ _________________ _________________ _________________ _________________ _________________
      Gradual-Triplex-Technology*    
           
Without colour gradient Without colour gradient With colour gradient With colour gradient Without colour gradient With colour gradient
           
Without bending strength gradient Without bending strength gradient Without bending strength gradient With bending strength gradient Without bending strength gradient Without bending strength gradient
           
Without translucency gradient Without translucency gradient Without translucency gradient With translucency gradient Without translucency gradient Without translucency gradient
_________________ _________________ _________________ _________________ _________________ _________________
Individual colouring
with Colour Liquids
Individual colouring
with Colour Liquids
Optional: Individualisation
with Colour Liquid
Intensiv
Optional: Individualisation
with Colour Liquid
Intensiv
Individual colouring
with Colour Liquids
Optional: Individualisation
with Colour Liquid
Intensiv
_________________ _________________ _________________ _________________ _________________ _________________
Sintering temperature Sintering temperature Sintering temperature Sintering temperature Sintering temperature Sintering temperature
1600 °C 1600 °C 1600 °C 1500 °C 1500 °C 1500 °C
_________________ _________________ _________________ _________________ _________________ _________________
Monolithic design in
the posterior area possible
Monolithic design in
the anterior area and
in the posterior area possible
Monolithic design in
the anterior area and
in the posterior area possible
Monolithic design in
the anterior area and
in the posterior area possible
Monolithic design in
the anterior area and
in the posterior area possible
Monolithic design in
the anterior area and
in the posterior area possible
_________________ _________________ _________________ _________________ _________________ _________________
           
*Gradual-Triplex-Technology: The zirconia is already provided with colour, translucency and bending strength gradients during the production process. This results in a natural colouring, a highly translucent cutting edge and an extremely high bending strength at the tooth neck.
 
 

Indications:


PRETTAU® PRETTAU® PRETTAU® PRETTAU® PRETTAU® PRETTAU®
  2 2 3 4 4
    DISPERSIVE® DISPERSIVE® ANTERIOR® ANTERIOR®
DISPERSIVE®
_________________ _________________ _________________ _________________ _________________ _________________
Copings Copings Copings Copings Copings Copings
_________________ _________________ _________________ _________________ _________________ _________________
Inlay, Onlay, Veneer Inlay, Onlay, Veneer Inlay, Onlay, Veneer Inlay, Onlay, Veneer Inlay, Onlay, Veneer Inlay, Onlay, Veneer
_________________ _________________ _________________ _________________ _________________ _________________
Crowns Crowns Crowns Crowns Crowns Crowns
_________________ _________________ _________________ _________________ _________________ _________________
Max. three-unit
bridges
Max. three-unit
bridges
Max. three-unit
bridges
Max. three-unit
bridges
Max. three-unit
bridges
Max. three-unit
bridges
_________________ _________________ _________________ _________________ _________________ _________________
Multiple-unit bridge Multiple-unit bridge Multiple-unit bridge Multiple-unit bridge  
   
_________________ _________________ _________________ _________________ _________________ _________________
Circular bridges Circular bridges Circular bridges Circular bridges    
   
           
           


 
Studies


Studies

więcej...

Prettau® 3 Dispersive®


Prettau® 3 Dispersive® A1 95H14


Paczka zawiera:
1 szt.
Numer katalogowy:
ZROC8021A01
Kolor:

Wysokość:
Systemu / średnica:


Particularly highly translucent and bending resistant zirconia with Gradual-Triplex Technology: natural colour gradient, extremely high bending strength and highly translucent cutting edge
Suitable for single crowns for up to circular bridges (full contour restorations or reduced structures for ceramic layering)

Elaboration with CAD/CAM milling bur Zirconia