новыйZirkonzahn.Webinar


 
Webinar Zirkonzahn.Double Milling
 
Webinar Zirkonzahn.MyWebsite
 
Webinar Zirkonzahn.Modellier Update Part I
 
Webinar Zirkonzahn.Implant-Planner
 
Webinar Zirkonzahn.Modifier (Basic)
 
Webinar Zirkonzahn.Modifier (Advanced)
 
Webinar Zirkonzahn.Scan
 
Zirkonzahn.Webinar Individual
 
 

Webinar Zirkonzahn.Double Milling


 

Place: Cisco Webex (microphone and webcam, stable Internet connection required)
Cost: on request
Duration: 90 minutes
Participants: small groups
Appointment: 29/05, 14:00-15:30 (CEST)
Programme:
  • Introduction to the advantages and application possibilities of Double Milling as new method for a faster but still accurate immediate patient treatment on the basis of real implantation data or preparation data
  • Integration of the Double Milling process into the Zirkonzahn workflow for M1, M4 and M5 milling units and application with Blank Repositioner Orbit in the M2 and M2 Dual milling units
  • Step-by-step explanation from Zirkonzahn.Archiv to Zirkonzahn.Nesting on the basis of concrete case studies
  • Case study 1: Double Milling with temporary restoration on prepared teeth
  • Case study 2: Double Milling with implant-supported immediate restoration
 


 

Webinar Zirkonzahn.MyWebsite


 

Place: Cisco Webex (microphone and webcam, stable Internet connection required)
Cost: on request
Duration: 60 minutes
Participants: Zirkonzahn customers, no previous knowledge required
 
Appointment: 10/06, 15:30-16:30 (CEST)
Programme:
  • Comprehensive insight into Zirkonzahn.MyWebsite – software for an easy realisation of homepages especially for dental laboratories
  • Step-by-step software explanation: we create live a completely new website and demonstrate:
  • how to define the basic content structure of a new website 
  • how to include case galleries, photos and YouTube videos 
  • how to update the page e.g. when replacing texts or adding information of new employees 
  • which Zirkonzahn photo galleries and video galleries can be integrated
  • how to optimise photos with the integrated image editing programme and predefined filters
 


 

Webinar Zirkonzahn.Modellier Update Part I


 

Place: Cisco Webex (microphone and webcam, stable Internet connection required)
Cost: on request
Duration: 90 minutes
Participants: Small group of Zirkonzahn customers
 
Appointment: on request
Programme:
  • The basic novelties of the Zirkonzahn.Modellier software update at a glance
  • On the basis of concrete case examples, you will discover:
  • The new functions for digital model design 
  • The completely renewed selection menu for implant prosthetic components
  • The newly designed Download Center
  • The individually definable colour selection
  • The new short keys for tooth set-ups
  • The new group menu for an effective data organisation
  • The cutting discs function (Disccutter)
  • The sectional views with precise measuring tool
 


 

Webinar Zirkonzahn.Implant-Planner


 

Place: Cisco Webex (microphone and webcam, stable Internet connection required)
Cost: on request
Duration: 90 minutes
Participants: All dental technicians and dentists interested in implant planning and workflow organisation
Appointment: on request
Programme:
  • Introduction to the Zirkonzahn.Implant-Planner software
  • Introduction to the integration and alignment of intraoral scan data
  • Import, display and matching of scan data and Dicom data (3D-view)
  • Positioning of the implants and selection of the drilling sleeves
  • Creation of surgical guide and individual impression trays
 


 

Webinar Zirkonzahn.Modifier (Basic)


 

Place: Cisco Webex (microphone and webcam, stable Internet connection required)
Cost: on request
Duration: 90 minutes
Participants: small group of Zirkonzahn customers, no previous knowledge of Zirkonzahn.Modifier required
Appointment: on request
Programme:
  • Graphics card update
  • Step-by-Step: Virtual Waxup Design
  • Introduction to key functions such as Multi-View-Management and Scaling
  • Intelligent tooth setup: Individuality despite positioning automatisms and the integration of natural tooth libraries
  • Insights into the newly designed virtual articulator window
  • Integration of Zirkonzahn.Modifier into the Zirkonzahn workflow from Archiv to Nesting
 


 

Webinar Zirkonzahn.Modifier (Advanced)


 

Place: Cisco Webex (microphone and webcam, stable Internet connection required)
Cost: on request
Duration: 90 minutes
Participants: small group of Zirkonzahn customers
Appointment: 28/05, 16:00-17:30 (CEST)
Programme:
  • Software Module Overview – Dynamic Face Animation: Simulation of static 3D face scans as animated smile movements coupled with planed restorations
  • Innovation – Generate individual mockups based on the pre-planned functional tooth setup
  • Tooth setups over reference planes and spheres with natural occlusion concepts
  • Boolean Operations
  • Tips and tricks in the Multi-View Mode
  • Software Module Overview – Modifier Virtual Articulator with a newly conceptualized articulator room
 


 

Webinar Zirkonzahn.Scan


 

Place: Cisco Webex (microphone and webcam, stable Internet connection required)
Cost: on request
Duration: 90 minutes
Participants: max. 5 clients with basic knowledge in Zirkonzahn.Scan
Appointment: on request
Programme:
  • Graphics card update
  • Complete patient data integration: intraoral scans, 2D photos, 3D facial scans, DICOM and STL files
  • Virtual articulation in Zirkonzahn.Scan software with PlaneSystem® and face bow
  • Use and positioning of digital reference planes
  • Special functions in Zirkonzahn.Scan (e.g. Quick-Register, Adjustment, Extras)
 


 

Zirkonzahn.Webinar Individual


 

Place: Cisco Webex (microphone and webcam, stable Internet connection required)
Cost: on request
Duration: up to 2.5 hours
or up to 4 hours
Appointment: on request
Programme: The contents of the webinar are compiled individually. For inspiration we have listed some possibilities here:
  • Installation and operation of the Zirkonzahn CAD/CAM system as well as basic introduction to working with the Zirkonzahn.Software for new customers
  • Introduction to the Zirkonzahn.Modifier software
  • Introduction to the Zirkonzahn.Implant-Planner software
  • Introduction to the different software modules of the Zirkonzahn.Modellier software
  • Combination of different software modules
  • Explanation and articulation of different patient data in the Zirkonzahn.Scan software
  • Digital design of an immediate restoration 
  • Digital design of a secondary bar structure
  • More efficient working thanks to Double Milling (pre-milling of the upper side of the restoration)
 


 

REGISTRATION, INFORMATION & APPOINTMENTS FOR WEBINAR:


Zirkonzahn Education
Phone: +39 0474 066650
education@zirkonzahn.com