The analogues replicate the precise connection to the implant which enables checking of the fitting accuracy of the Raw-Abutments^® and titanium bases directly on the model.

Healing caps are used during the healing phase to seal the implant and to define the emergence profile.

The ScanAnalogs unite the function of a laboratory analogue with the one of a scanmarker.

Thanks to the extremely precise geometry of the Scanmarkers and with the aid of the Zirkonzahn scanners, it is possible to transfer the exact position and orientation of the implants from the model into the software.

White scanmarker for position detection and alignment of the implant on the model
or in the mouth of the patient.

White Metal Scanmarkers are used to detect the position and alignment of the implant during intraoral and model scanning.

The stable impression copings are used together with the laboratory analogues for the exact transfer of the implant position in the jaw onto the plaster model or combined with ScanAnalogs in the software.

Titanium bases and accessories for individually manufactured zirconia abutments

Pre-fabricated blanks of a high-quality medical titanium alloy for production of individual abutments

 
Adapter for different implant systems for screwing down multi-unit restorations

Zirkonzahn LOC-Connector is a snap attachment system for implants and bars that is used to connect complete overdentures to dental implants.

The Zirkonzahn Titanium Posts are root posts made from a medical titanium alloy.

A tool for easily removing titanium bases from laboratory analogues or implants

The Universal Extractor is used to remove directly screwed secondary structures (e.g. made of metal or resin) as well as titanium bases without internal threads from implants with flat-angle connection geometries.

Set for all types of restorations

The Sealing Screw Extractor can be used to loosen sealing screws out of zirconia structures without damaging the threaded screw channel.