новыйфрезерный аппарат M2 Dual Wet Heavy Metal

Flexibly configurable two-chamber milling unit with 5+1 axes simultaneous milling technology 

The two separate, flexibly configurable milling chambers are the distinctive feature of  the new M2 Dual Wet Heavy Metal milling unit. Without cleaning time, soft and hard materials can be serially processed wet and dry. Via integrated PC with touchscreen, milling processes and calibration processes can be started and elaboration tools can be loaded. The two milling chambers are equipped with an automatic 21-compartment tool changer. In the contamination-protected extra-large tool chamber, used and new elaboration tools can be perfectly organised and stored. The optical tool detection ensures greater safety during milling. The optical identification of the elaboration tools makes sure that the correct tools are used.

Basic Equipment 

• Computer-controlled two-chamber milling unit with 5+1 axes simultaneous milling technology and optical tool detection with 21-compartment tool changer
• Optionally with wet processing function for one or two milling chambers for processing all materials for dental prostheses (zirconia, resin, wax, Sintermetall, cobalt-chrome, titanium, Raw-Abutments^® prefabricated titanium abutment blanks, glass ceramics and composite)
• Different blank holders for round material blanks and other workpiece forms (optional)
  • Raw-Abutment^® Holder
  • Glass Ceramics Holder 
  • JawPositioner Support

Overview of the characteristics 

• Separate milling chambers enable sequential wet and dry processing of the materials without manual in-between cleaning
  (depending on equipment)
• Depending on the selected equipment variant, for processing all materials and all kinds of restorations (zirconia, resin, wax, Sintermetall, cobalt-chrome, titanium, Raw-Abutments^® prefabricated titanium abutment blanks, glass ceramics and composite)
• Stand-alone solution: can be controlled via integrated PC with touchscreen directly on the milling unit, elaboration tools can be loaded and milling processes or calibration processes can be started
• High-performance milling spindle with optimised cooling water supply for particularly gentle material elaboration
• CAD/CAM milling bur 6 mm and orbit with opposed rotary axes (A and B) for a stable elaboration process; elaboration time can be varied by selecting different surface qualities
• Perfect tool organisation thanks to contamination-protected tool chamber with automatic 21-compartment tool changer function and 21 slots for the storage and organisation of used and new tools
• Optical tool detection: the optical identification of elaboration tools ensures that the right tools are selected for each milling operation. Milling errors caused by incorrect tool selection are thus eliminated
• Spaciously designed, optimally illuminated and easily accessible processing areas
• Can be cleaned easily
• During the elaboration of resins, the Ioniser (optional) ensures a clean milling unit by discharging the plastic shavings. This results in more cleanliness during the milling process and increases the machine performance thanks to the shorter milling time

Accessories 

		NEw! Ioniser M2 Device for the electrostatic discharge of plastic shavings for more cleanliness during the milling process (optionally for the new device or as retrofitting article) товарный номер: ZBAC3321
		Raw-Abutment® Holder Holder for fixing and for the serial processing of up to three prefabricated titanium abutment blanks (Raw-Abutments®) in the Zirkonzahn milling unit товарный номер: ZBAC1691
		Glass Ceramics Holder Holder for fixing and for the serial processing of up to four Zirkonzahn glass ceramic blanks in the Zirkonzahn milling unit товарный номер: ZBAC1651
		JawPositioner Support Support for fixing the JawPositioner in the orbit of the Zirkonzahn milling unit товарный номер: ZBAC3511

NEW! Blank Repositioner Orbit and Blank Repositioner Holder for M2 and M2 Dual Wet Heavy Metal milling units Blank Repositioner Orbit and Blank Repositioner Holder are used for the removal and the reclamping of material blanks (Ø 95mm) at exactly the same position in the orbit. This is useful for adjusting the friction of telescopic works or for milling implant-supported restorations.

дальше...

Processable materials with full equipment 

*The indications are approximate values and may vary depending on equipment and restoration type.

Technical specifications 

Further information and accessories 

Диапазон возможностей		Software		материалы для фрезеровки		принадлежности