NOVOFresadora M2 Wet Heavy Metal


Overview of the characteristics 


  • Computer-controlled stand-alone milling unit with orbit ⌀ 95 mm
  • Integrated PC with touch screen for direct control (loading of tools, controlling of milling and calibration processes)
  • Fully automated 5+1 axis simultaneous milling technology
  • High-performance milling spindle with optimised cooling water supply for particularly gentle material elaboration
  • With wet processing function for processing all common dental materials and kinds of restorations (zirconia, resin, wax, Sintermetall, cobalt-chrome, titanium, Raw-Abutments®, glass-ceramics and composite) insertion of blanks (for some, holders are necessary): Material blanks with ⌀ 95 mm as well as glass-ceramic and Raw-Abutment® blanks
  • CAD/CAM milling bur 6 mm and orbit with opposed rotary axes (A and B) for a stable elaboration process; elaboration time can be varied by selecting different surface qualities
  • Spaciously designed, optimally illuminated and easily accessible milling chambers
  • Contamination-protected tool chamber, which is separated from the milling chamber, with automatic 21-compartment tool changer function
  • Optical tool detection for a secure selection of the suitable milling tools
  • Integrated space for the organised storage of up to three additional tool magazines, with 21 tool slots each (3 x 21), 84 tool slots in total
  • Automatic self-cleaning and drying function and Cleaning Kit for manual cleaning

M2/M2 DUAL UPGRADE KIT
The M2 Wet Heavy Metal milling unit can be upgraded to the M2 Teleskoper milling unit by integrating the Teleskoper Orbit ⌀ 125 mm. This enables the elaboration of material blanks with a diameter of ⌀ 95 mm, ⌀ 98 mm, ⌀ 106 mm and ⌀ 125 mm. It also increases the number of glass-ceramic and Raw-Abutment® blanks that can be elaborated in one milling process.

Accessories 


  Novo! Tool magazine D6
with 21 tool slots for the storage and organisation of tools

Número do produto: ZBAC4201
  Novo! Ioniser M2 / M2 Dual right
Device for the electrostatic discharge of plastic shavings for more cleanliness during the milling process

Número do produto: ZBAC3321
  Raw-Abutment® Holder
Holder for fixing and for the serial processing of up to three prefabricated titanium abutment blanks (Raw-Abutments®) in the Zirkonzahn milling unit with ⌀ 95 mm orbit

Número do produto: ZBAC1691
  Glass Ceramics Holder
Holder for fixing and for the serial processing of up to four glass ceramic blanks in the Zirkonzahn milling unit with ⌀ 95 mm orbit

Número do produto: ZBAC1651   
  JawPositioner Support
Support used to fix the JawPositioner into the ⌀ 95 mm orbit of the Zirkonzahn milling unit

Número do produto: ZBAC3511

 

Processable materials 


 
 Zirconia  Resin  Wax  Wood  Sinter
 metal
 Chrome-
 Cobalt
 Titanium  Raw-
 Abutment®
 Glass
 ceramics
 Composite

Technical specifications 


 

Weight 155 kg

Width 77 cm + 15 cm Cleaning Kit

Height 69 cm

Depth 66 cm

Casing Hardened Securit glass UNI ISO 12150

Processing axes 5+1

Power capacity 600 W

Operating voltage 100 – 240V

Power input 2.6 A (5.5 A)

Chuck ⌀ 6 mm

Spindle speed Depending on equipment

Torque 13 Ncm

Orbit ⌀ 95 mm

Workpieces
(some with special holders
at extra charge):
1x material blank ⌀ 95 mm, up to 4x glass-ceramic blanks, up to 3x prefabricated titanium abutment blanks (Raw-Abutments®), JawPositioner transfer pattern

Mais informação e acessórios 


 
     
Scanners   Software   Materiais fresaveis   Acessórios