M4 Wet Heavy Metal Milling Unit
Ioniser M4 Device for the electrostatic discharge of plastic shavings for more cleanliness during the milling process (optionally for the new device or as retrofitting article) Item number: ZBAC3301 |
||
Raw-Abutment® Holder Holder for fixing and for the serial processing of up to ten prefabricated titanium abutment blanks (Raw-Abutments®) in the Zirkonzahn milling unit Item number: ZBAC3451 |
||
Glass Ceramics Holder Holder for fixing and for the serial processing of up to ten glass ceramic blanks in the Zirkonzahn milling unit Item number: ZBAC3431 |
||
Zero-point stylus D6 for milling unit M1/M4 For calibration of zero-position for Milling Unit M1/M4 Diameter: Ø 6mm Item number: ZBAC0731 |
||
2-Blank-Plate M4 Holding device for the elaboration of up to two material blanks (Ø 95 mm) with the M4 Wet Heavy Metal milling unit Item number: ZBAC3411 |
||
4-Blank-Plate M4 Holding device for processing up to four material blanks (Ø 95 mm) with the M4 Wet Heavy Metal milling unit Item number: ZBAC3401 |
||
Teleskoper Plate M4 Holding device for processing one material blank (Ø 95 mm, Ø 98 mm, Ø 106 or Ø 125 mm) with the M4 Wet Heavy Metal milling unit Item number: ZBAC3421 |