General accessory 

Air Generator
Piston compressor and air dryer in a single device, capacity for one Zirkonzahn milling unit

Technical data:
Volume: 50 litres
Flow rate: 120l/min
Pressure: 7 bar
Power: 2200W
Operating voltage: 230 V/ 120V
Dimensions: (height/depth/width) 89 cm x 72 cm x 49 cm
Weight: 106 kg

Item number: SYAB0430
Air Dryer
Air dryer with high performance compressed air filter with steam traps for eliminating the condensed water as well as other dirt particles inside the compressed air system of the compressor.

Item number: SYAB0450		  
Cooling Lubricant Plus Milling
Water-mixable coolant for wet processing
Concentration: 0.8 % ≙ 200 ml concentrate for 25 l of distilled water
Package content: 200 ml

Item number: ZBAC2106
3D mouse
For even more intuitive moving of virtually constructed cases on the PC, like if you would hold the model in your own hands
Package content: 1 piece

Item number: ZBAC9041
Workbench Milling Unit
(60 cm x 73 cm x 95 cm)

Item number: ZBZA0111		      
Workbench Milling Unit
(133 cm x 73 cm x 95 cm)  
 
Item number: ZBZA0101
Milling bur holder ZIRCONIA (3 mm)
The magnetic milling bur holder can be positioned almost anywhere in the milling unit, which guarantees proper and spacesaving storage of the different milling burs.
Package content: 1 piece

Item number: ZBAC1601
Milling bur holder ZIRCONIA (6 mm)
The magnetic milling bur holder can be positioned almost anywhere in the milling unit, which guarantees proper and spacesaving storage of the different milling burs.
Package content: 1 piece

Item number: ZBAC1606
Milling bur holder PMMA (3 mm)
The magnetic milling bur holder can be positioned almost anywhere in the milling unit, which guarantees proper and spacesaving storage of the different milling burs.
Package content: 1 piece

Item number: ZBAC1611
Milling bur holder PMMA (6 mm)
The magnetic milling bur holder can be positioned almost anywhere in the milling unit, which guarantees proper and spacesaving storage of the different milling burs.
Package content: 1 piece

Item number: ZBAC1616
Milling bur holder WAX (3 mm)
The magnetic milling bur holder can be positioned almost anywhere in the milling unit, which guarantees proper and spacesaving storage of the different milling burs.
Package content: 1 piece

Item number: ZBAC1621
Milling bur holder WAX (6 mm)
The magnetic milling bur holder can be positioned almost anywhere in the milling unit, which guarantees proper and spacesaving storage of the different milling burs.
Package content: 1 piece

Item number: ZBAC1626
Milling bur holder SINTER METAL (3 mm)
The magnetic milling bur holder can be positioned almost anywhere in the milling unit, which guarantees proper and spacesaving storage of the different milling burs.
Package content: 1 piece

Item number: ZBAC1632
Milling bur holder SINTER METAL (6 mm)
The magnetic milling bur holder can be positioned almost anywhere in the milling unit, which guarantees proper and spacesaving storage of the different milling burs.
Package content: 1 piece

Item number: ZBAC1633
Milling bur holder TITAN (6 mm)
The magnetic milling bur holder can be positioned almost anywhere in the milling unit, which guarantees proper and spacesaving storage of the different milling burs.
Package content: 1 set

Item number: ZBAC1634
Milling bur holder CRCO (6 mm)
The magnetic milling bur holder can be positioned almost anywhere in the milling unit, which guarantees proper and spacesaving storage of the different milling burs.
Package content: 1 set

Item number: ZBAC1635
Milling bur holder METAL (6 mm)
The magnetic milling bur holder can be positioned almost anywhere in the milling unit, which guarantees proper and spacesaving storage of the different milling burs.
Package content: 1 piece

Item number: ZBAC1636
Milling bur holder GLASS (3 mm)
The magnetic milling bur holder can be positioned almost anywhere in the milling unit, which guarantees proper and spacesaving storage of the different milling burs.
Package content: 1 piece

Item number: ZBAC1638
Milling bur holder GLASS (6 mm)
The magnetic milling bur holder can be positioned almost anywhere in the milling unit, which guarantees proper and spacesaving storage of the different milling burs.
Package content: 1 piece

Item number: ZBAC1639
Warranty extension CAD/CAM “all in”
Exchange of all defective wearing and spare parts of CAD/CAM System 5-TEC
(subject to device check by the manufacturer)
Duration: 1 year

Item number: GARANTIE 01
Maintenance contract for software modules
Automatic program updates, technical and dental technical customer support with and online remote maintenance
Duration: until the end of the calendar year

Article number upon request, depending on Software-Module CAD/CAM