NEWM2 Dual Wet Heavy Metal Milling Unit


Flexibly configurable two-chamber milling unit with 5+1 axes milling technology 


The two separate, flexibly configurable milling chambers are the distinctive feature of  the new M2 Dual Wet Heavy Metal milling unit. Without cleaning time, soft and hard materials can be serially processed wet and dry. Via integrated PC with touchscreen, milling processes and calibration processes can be started and elaboration tools can be loaded. The two milling chambers are equipped with an automatic 21-compartment tool changer. In the contamination-protected extra-large tool chamber, used and new elaboration tools can be perfectly organized and stored. The optical tool detection ensures greater safety during milling. The optical identification of the elaboration tools makes sure that the correct tools are used.

Basic Equipment 


  • Computer-controlled two-chamber milling unit with 5+1 axes milling technology and optical tool detection with 2 x 21-compartment tool changer
  • Optionally with wet processing function for one or two milling chambers for processing all materials for dental prostheses (zirconia, resin, wax, Sintermetall, cobalt-chrome, titanium, glass ceramics and composite)
  • Different blank holders for round material blanks and other workpiece forms (optional)
    • Glass Ceramics Holder 
    • JawPositioner Support
    • Multi Blank Holder

Overview of the characteristics 


  • Separate milling chambers enable sequential wet and dry processing of the materials without in-between cleaning
    (depending on equipment)
  • Depending on the selected equipment variant, for processing all materials and all kinds of restorations (zirconia, resin, wax, Sintermetall, cobalt-chrome, titanium, glass ceramics and composite)
  • Stand-alone solution: can be controlled via integrated PC with touchscreen directly on the milling unit, elaboration tools can be loaded and milling processes or calibration processes can be started
  • High-performance milling spindle with optimized cooling water supply for particularly gentle material elaboration
  • CAD/CAM milling bur 6 mm and orbit with opposed rotary axes (A and B) for a stable elaboration process; elaboration time can be varied by selecting different surface qualities
  • Perfect tool organization thanks to contamination-protected tool chamber with automatic 2 x 21-compartment tool changer function and 21 slots for the storage and organization of used and new tools
  • Optical tool detection: the optical identification of elaboration tools ensures that the right tools are selected for each milling operation. Milling errors caused by incorrect tool selection are thus eliminated
  • Spaciously designed, optimally illuminated and easily accessible processing areas
  • Can be cleaned easily
  • During the elaboration of resins, the Ioniser (optional) ensures a clean milling unit by discharging the plastic shavings. This results in more cleanliness during the milling process and increases the machine performance thanks to the shorter milling time

Accessories 


  NEw! Ioniser M2
Device for the electrostatic discharge of plastic shavings for more cleanliness during the milling process (optionally for the new device or as retrofitting article)

Item number: ZBAC3321
  NEw! Multi Blank Holder
Holder for fixing and for the serial processing of several small zirconia blanks (size 1) in the Zirkonzahn milling unit

Item number: ZBAC3101
  Glass Ceramics Holder
Holder for fixing and for the serial processing of up to four Zirkonzahn glass ceramic blanks in the Zirkonzahn milling unit

Item number: ZBAC1651   
  JawPositioner Support
Support for fixing the JawPositioner in the orbit of the Zirkonzahn milling unit

Item number: ZBAC3511

 

Processable materials with full equipment 


 
 Zirconia  Resin  Wax  Wood  Sinter
 metal
 Chrome-
 Cobalt
 Titanium  Bridge-Rod  Glass
 ceramics
 Composite
Machine running time per unit:
Wax: 7 min.
Zirconia, resin, sinter metal: 9 min.
Glass ceramics: 30-40 min.
Titanium, chrome-cobalt: 50 min.
 

*The indications are approximate values and may vary depending on equipment and restoration type.

Technical specifications 


 

Weight 210 kg

Width 125 cm

Height 69 cm

Depth 62 cm

Casing Hardened Securit glass UNI ISO 12150

Processing axes 5+1

Power capacity 600 W

Operating voltage 100 – 240V

Power input 2.6 A (5.5 A)

Chuck Ø 6 mm

Spindle speed Depending on equipment

Torque 13 Ncm

Workpiece Ø 95 mm

Further information and accessories 


 
     
Range of applications   Software   Millable materials   Accessories