Elaboration Instruments – Product Info  




Our product range covers the entire spectrum of the zirconium processing. They are subdivided into abrasive stones for the turbine and abrasive devices for the tool holder.

There are four different tungsten-carbide burs for the tool holder, used for processing green zirconium, two diamond burs and five zirconium oxide stones for the post-processing of sintered zirconium, a diamond rubber and two separating discs, one for green zirconia and one for sintered zirconia.
For the turbine, three different diamond blurs are available for the elaboration of sintered zirconia.

By processing the zirconia structures it is important not to set the revolutions per minute too high. For the elaboration with the tool holder a maximum of 10.000 rpm is recommended. Furthermore, do not apply an excessive pressure on the turbine and use water cooling.   

Tungsten-Carbide Bur 


Tungsten-Carbide Bur 001 Bullet
Fine tungsten-carbide bur for trimming pre-sintered zirconia
Package content: 2 pieces
ø: 2.35 mm
Length: 7.5 mm
Shank diameter: 2.35 mm
Item number: ZZ001
Tungsten-Carbide Bur 002 Bullet
Fine tungsten-carbide bur for trimming pre-sintered zirconia
Package content: 2 pieces
ø: 1.2 mm
Length: 7.5 mm
Shank diameter: 2.35 mm
Item number: ZZ002
Tungsten-Carbide Bur 003 Round End Cylinder
Fine tungsten-carbide bur for trimming pre-sintered zirconia
Package content: 2 pieces
ø: 2.3 mm
Length: 15 mm
Shank diameter: 2.35 mm
Item number: ZZ003
Tungsten-Carbide Bur 004 Round End Cylinder
Fine tungsten-carbide bur for trimming pre-sintered zirconia
Package content: 2 pieces
ø: 2.9 mm
Length: 13 mm
Shank diameter: 2.35 mm
Item number: ZZ004

Diamond Bur 


Diamond Bur 101 Flat End Taper
For lab hand piece used for trimming ceramics
Package content: 5 pieces
ø: 1.6 mm
Length: 10 mm
Shank diameter: 2,35 mm
Item number: ZZ101
Diamond Bur 102 Flame
For lab hand piece used for trimming ceramics
Package content: 5 pieces
ø: 1.2 mm
Length: 10 mm
Shank diameter: 2.35 mm
Item number: ZZ102
Diamond Bur 201 Round End Taper
Friction grip sintered diamonds or water-cooled turbine, used for trimming sintered zirconia
Package content: 5 pieces
ø: 2.1 mm
Length: 10 mm
Shank diameter: 1.6 mm
Item number: ZZ201

 

Diamond Bur 202 Needle
Friction grip sintered diamonds or water-cooled turbine, used for trimming sintered zirconia
Package content: 5 pieces
ø: 1.1 mm
Length: 10 mm
Shank diameter: 1.6 mm
Item number: ZZ202
Diamond Bur 203 Flat End Cylinder
Friction grip sintered diamonds or water-cooled turbine, used for trimming sintered zirconia
Package content: 5 pieces
ø: 1.1 mm
Length: 6.5 mm
Shank diameter: 1.6 mm
Item number: ZZ203

Elaboration Instruments 


 

 
  Set Zirconia Finishing 901
Package content: 12 different zirconia working tools and other materials

Item number: ZZ901

 
Diamond Rubber Wheel 403
Used to polish sintered zirconia
Package content: 3 pieces
ø: 16 mm
Width of the Disc: 1.3 mm
Shank diameter: 2.35 mm
Item number: ZZ403
Diamond Separating Disc 501
Used to cut pre-sintered zirconia
Package content: 1 piece
ø: 32 mm
Width of the Disc: 0.3 mm
Shank diameter: 2.35 mm
Item number: ZZ501
Diamond Separating Disc 502
Used to cut pre-sintered zirconia
Package content: 1 piece
ø: 19.5 mm
Width of the Disc: 0.2 mm
Shank diameter: 2.35 mm
Item number: ZZ502
Three-bladed Milling Bur
Cuts Frame-resin templates with handpiece
Package content: 1 piece
Item number: FR811

Elaboration stone for zirconia 





 
  Set Finishing stone for zirconia 306
Used for trimming of sintered zirconia
Package content: 5 finishing stones for zirconia

Item number: ZZ306



Finishing stone for zirconia 301
Package content: 2 pieces
ø: 12.7 mm
Height: 3,2 mm
Shank diameter: 2,35 mm
Item number: ZZ301
Finishing stone for zirconia 302
Package content: 2 pieces
ø: 12.7 mm
Height: 2 mm
Shank diameter: 2,35 mm
Item number: ZZ302
Finishing stone for zirconia 303
Package content: 3 pieces
ø: 7.8 mm
Height: 3.5 mm
Shank diameter: 2.35 mm
Item number: ZZ303
Finishing stone for zirconia 304
Package content: 3 pieces
ø: 4 mm
Height: 12.7 mm
Shank diameter: 2.35 mm
Item number: ZZ304
Finishing stone for zirconia 305
Package content: 6 pieces
ø: 2.7 mm
Height: 7 mm
Shank diameter: 2.35 mm
Item number: ZZ305

Diamond sharpening stone 


 

 
  Set Diamond Impregnated Stone 316
Used for trimming of sintered zirconia
Long Durability
Package content: 3 Diamond Impregnated Stones

Item number: ZZ316

 
Diamond Impregnated Stone 311
Package content: 2 pieces
ø: 3.8 mm
Shank diameter: 2.35 mm
Item number: ZZ311
Diamond Impregnated Stone 312
Package content: 2 pieces
ø: 4,8 mm
Shank diameter: 2.35 mm
Item number: ZZ312
Diamond Impregnated Stone 313
Package content: 2 pieces
ø: 12.3 mm
Shank diameter: 2.35 mm
Item number: ZZ313

Zirconia polishers 



The new zirconia polishers ensure a fast, safe and low-heat treatment of zirconium oxide without neglecting precision. As of now Zirkonzahn offers zirconia polishers in three different types (blue, pink, grey): The blue version is particularly suitable for defining frameworks and their edges, whereas pink and grey polishers can be used to polish and finish unblended areas. The polishers are available as a set (small polishers, lenses, disks). Lens, wheel, disk and tip can also be ordered separately in all three versions. This new product stands out because of its remarkably high stability.      




 
  Set zirconia polishers small
For working sintered zirconia
Package content: 6 different zirconia polishers

Item number: ZZ451



Zirconia polisher wheel blue
For the rough-working of sintered zirconia
Package content: 2 pieces
ø: 11.5 mm
Strength: 2 mm
Shank diameter: 2.35 mm
Item number: ZZ412
Zirconia polisher wheel pink
For the fine-working of sintered zirconia
Package content: 2 pieces
ø: 11.5 mm
Strength: 2 mm
Shank diameter: 2.35 mm
Item number: ZZ422
Zirconia polisher wheel grey
For high-polishing sintered zirconia
Package content: 2 pieces
ø: 11.5 mm
Strength: 2 mm
Shank diameter: 2.35 mm
Item number: ZZ432
Zirconia polisher flame blue
For the rough-working of sintered zirconia
Package content: 3 pieces
ø: 3.3 mm
Height: 7 mm
Shank diameter: 2.35 mm
Item number: ZZ411
Zirconia polisher flame pink
For the fine-working of sintered zirconia
Package content: 3 pieces
ø: 3.3 mm
Height: 7 mm
Shank diameter: 2.35 mm
Item number: ZZ421
Zirconia polisher flame grey
For high-polishing sintered zirconia
Package content: 3 pieces
ø: 3.3 mm
Height: 7 mm
Shank diameter: 2.35 mm
Item number: ZZ431





 
  Set zirconia polishers disc
For working sintered zirconia
Package content: 3 different zirconia polishers disc

Item number: ZZ461



Zirconia polisher disc blue
Without mandrel
For the rough-working of sintered zirconia
Package content: 1 piece
ø: 22 mm
Strength: 3.5 mm
Item number: ZZ413
Zirconia polisher disc pink
Without mandrel
For the fine-working of sintered zirconia
Package content: 1 piece
ø: 22 mm
Strength: 3.5 mm
Item number: ZZ423
Zirconia polisher disc grey
Without mandrel
For high-polishing sintered zirconia
Package content: 1 piece
ø: 22 mm
Strength: 3.5 mm
Item number: ZZ433





 
  New Set polishers disc extra thin
For working sintered zirconia
Package content: 3 different zirconia polishers disc extra thin

Item number: ZZ481



New Zirconia polisher disc extra thin blue
Without mandrel
For the rough-working of sintered zirconia
Package content: 1 piece
ø: 20 mm
Strength: 1 mm
Item number: ZZ415
New Zirconia polisher disc extra thin pink
Without mandrel
For the fine-working of sintered zirconia
Package content: 1 piece
ø: 20 mm
Strength: 1 mm
Item number: ZZ425
New Zirconia polisher disc extra thin grey
Without mandrel
For high-polishing sintered zirconia
Package content: 1 piece
ø: 20 mm
Strength: 1 mm
Item number: ZZ435





 
  Set zirconia polishers lense
For working sintered zirconia
Package content: 3 different zirconia polishers lense

Item number: ZZ471



Zirconia polisher lense blue
Without mandrel
For the rough-working of sintered zirconia
Package content: 1 piece
ø: 22 mm
Strength: 3 mm
Item number: ZZ414
Zirconia polisher lense pink
Without mandrel
For the fine-working of sintered zirconia
Package content: 1 piece
ø: 22 mm
Strength: 3 mm
Item number: ZZ424
Zirconia polisher lense grey
Without mandrel
For high-polishing sintered zirconia
Package content: 1 piece
ø: 22 mm
Strength: 3 mm
Item number: ZZ434



Mandrel
For zirconia polishers: lense and disc
Package content: 5 pieces
Shank diameter: 2.35 mm
Item number: ZZ441

Dental polishers