Zirkograph 025 ECO 




The original
This copy-milling unit, also called 'The Volksfräser', is a machine designed for the manual manufacture of crown & bridge framework made of zirconia. The Volksfräser has been conceived in such a way that, owing to its small dimensions of 59 cm length and 25 cm width, it can be ideally used as a lab bench. Contrary to the Zirkograph 025, our 5-axis milling unit, the Volksfräser is supplied in its base execution as a 4-axis milling equipment only. Nevertheless, this is not a disadvantage because works with up to 14 units can be performed. Only wide spread, implant-borne, occlusally screw-retained bridges cannot be realized since the individual implants are never placed in parallel but they diverge more or less from one another. A 5th axis is required for such special bridges. As of now this 5th axis is available for the Volksfräser as well.

Yves Probst
„The Zirkograph brought life into our laboratory, and how!“
Yves Probst, master dental technician from France
 


Zirkograph 025 ECO with 5th axis.

 











 
Lenght: 59 cm
Width: 25 cm
Height: 57 cm
Weight: 21 kg
   
Output Power: 190 W
Compressed
Air Supply:
6 bar
   
Range of Application: From single crowns to 16-unit bridges (using the 5th axis occlusally screw-retained bridges can be created)
Remarks: 5th axis optional by request

Designer Zirkograph 





Photogallery



Designer Zirkograph

 

Length: 61 cm
Width: 23 cm
Height: 55 cm
Weight: 24 kg
   
Output Power: 190 W
Compressed
Air Supply:
6 bar
   
Range of Application: From single unit crown to 16 unit bridges
Remarks: 5th axis included

Accessories 


Workbench - Black without drawers
(with integrated control box for milling unit)
For Zirkograph 025 ECO and Designer Zirkograph
(77 cm x 45 cm x 81 cm)

Item number: SY0043
Workbench - Black with drawers
(with integrated control box for milling unit)
For Zirkograph 025, 025 ECO and Designer Zirkograph
(111 cm x 45 cm x 81 cm)

Item number: SY0040
5th axis for Zirkograph 025 ECO
Five axes milling device for the Zirkograph 025 ECO,
which allows you any movement to accommodate
complex cases

Item numberr: ZBAA8241
Pendulum
Content: 1x pendulum arch, 2x retainer pins (2.46/M2; 2.05/M1.4),
2x positioning screws
Assists perpendicular abutment alignment of screw retained
implant bridges for milling

Item number: ZBAA8231
Retainer Pin 2,46/M2
Accessory for pendulum

Item number: ZBAA8351
Retainer Pin 2,05/M1,4
Accessory for pendulum

Item number: ZBAA8361
Retainer Pin 3/M2
Accessory for pendulum

Item number: ZBAA8371
Retainer Pin 1,6/M1,4
Accessory for pendulum

Item number: ZBAA8381
Retainer Pin long 2,46/M2
Accessory for pendulum for extra long screw canals

Item number: ZBAA8356
Retainer Pin long 2,05/M1,4
Accessory for pendulum for extra long screw canals

Item number: ZBAA8366
Retainer Pin long 3/M2
Accessory for pendulum for extra long screw canals

Item number: ZBAA8376
Retainer Pin long 1,6/M1,4
Accessory for pendulum for extra long screw canals

Item number: ZBAA8386
Dust ring for Zirkograph 025
Quantity: 1 pc
Optimal extraction power and reduced dust spreading over your workbench

Item number: ZBAA8291
Dust ring for Zirkograph 025 ECO
Quantity: 1 pc
Optimal extraction power and reduced dust spreading over your workbench

Item number: ZBAA8301
Dust cover for Zirkograph 025
Quantity: 1 pc

Item number: ERAA0511
Dust cover for Zirkograph 025 ECO
Quantity: 1 pc

Item number: ERAA0421
Dust cover for Zirkograph 025 ECO 5. Achse
Quantity: 1 pc

Item number: ZBAA8271
Dust cover for Designer Zirkograph - Back
Quantity: 1 pc

Item number: ZBAA9601
Dust cover for Designer Zirkograph - Front
Quantity: 1 pc

Item number: ZBAA9611
Dust Bowl for Zirkograph 025
Content: 1 bowl
Maximises dust extraction suction during milling (only in combination with tilting device)

Item number: ZBAA9501
Dust Bowl for Zirkograph 025 ECO and Designer Zirkograph
Content: 1 bowl
Maximises dust extraction suction during milling (only in combination with 5th axis)

Item number: ZBAA9511
Upgrade Set for dust Bowl for Zirkograph 025
Content: 1 bowl, 2 intermediate panels Maximises dust extraction suction during milling
(only in combination with tilting device)
For systems without built-in magnets

Item number: ZBAA9551
Upgrade Set for dust Bowl for Zirkograph 025 ECO and Designer Zirkograph
Content: 1 bowl, 2 intermediate panels Maximises dust extraction suction during milling
(only in combination with 5th axis)
For systems without built-in magnets

Item number: ZBAA9561
Ball bearing housing for spring arm D=12 mm
Spring slide connector to horizontal spring arm

Item number: ERAA0011
Spring for Zirkograph 025 ECO and Designer Zirkograph
Support spring for milling arm

Item number: ERAA0623
Clamp claw aluminium
Fastens milling table inserts
For Zirkograph 025, 025 ECO and Designer Zirkograph

Item number: ERAA0871
Cylinder head screw M4 x 8 galvanized for stainless-steel inserts
Fastens clamps for milling table inserts

Item number: ERAA0031
Cylinder head screw M4 x 12 galvanized for stainless-steel inserts
Fastens clamps for milling table inserts

Item number: ERAA0033