Titanium bases and accessories for individually manufactured zirconia abutments 




The use of titanium bases reduces the effect of transverse forces on the restoration, in contrast to restorations screwed directly on the implant. We generally recommend the use of titanium bases for all screw-retained implant structures, particularly though for those in the anterior tooth region.

TITANIUM BASES IN 5 HEIGHTS ...
The Zirkonzahn titanium bases are available in up to five different platform heights, in order to bring the implant to the desired gingival level.

... ANODISED
Moreover, the titanium bases can also be anodised in different colours using the Zirkonzahn Titanium Spectral-Colouring Anodizer. The high biocompatibility of the material remains unchanged.

Conical cemented titanium bases non hex 


 
The Conical Cemented Titanium Bases NON HEX without anti-rotation device are ideal for the manufacturing of bridges and multi-unit restorations.
The titanium bases are designed as short and conical as possible. Spiral grooves located on the surface increase the contact area and ensure optimum adhesion of the cement.
 
For multi-unit restorations
Conical shape with spiral grooves
Without anti-rotation device
Available in different heights

Parallel cemented titanium bases hex 


 
The Parallel Cemented Titanium Bases HEX are equipped with the required anti-rotation device depending on the implant system. This ensures that restorations can no longer be twisted once they are cemented. They are especially suitable for single crowns.
 
For single crowns
Parallel shaft
With anti-rotation device
Available in different heights

Raw-Abutment® hex 


 
The Raw‑Abutments® made from ASTM-approved titanium Grade 5 are used for the production of individual abutments. The industrially prefabricated implant connection guarantees highest precision and fitting accuracy. The special milling strategies and milling burs ensure a particularly smooth surface structure.
The abutment geometry is freely and individually customisable. Depending on the implant system, different Raw‑Abutment® blanks are required.
 
   
For single crowns
With anti-rotation device
Available with 10 mm and 14 mm diameter
Can be anodised in different colours with the
Titanium Spectral-Colouring Anodizer

Multi Unit Abutment non hex 


 
The Multi Unit Abutments NON HEX without anti-rotation device are suited for multi-unit restorations. They are designed in one piece to prevent the ingress of bacteria. The application of the Multi Unit Abutments NON HEX is extremely easy, because all types of implants have been adapted on a standard port. They are available in five different gingival heights to offer the best possible solution for every case.
 
For multi-unit restorations
Conical Cemented Titanium Base
as component of the Multi Unit Abutment
Without anti-rotation device
Available in different heights

Abutment screw metal 


 
This abutment screw is suitable to fix titanium bases, Scanmarkers and Raw‑Abutments®, but not zirconia structures.
 
For titanium bases, Scanmarkers and metal structures with direct connection, not for zirconia abutments
With conical or flat screw head
Abutment Screw Laboratory: Provisional screw for fixing the structure on the model
     

Abutment screw integral zirconia 


 
This abutment screw with flat screw head is ideal for directly screwed zirconia or resin structures. However, we generally recommend the use of titanium bases for all implant-supported restorations.
 
For individual abutments made from zirconia and resin
With flat screw head
Abutment Screw Laboratory: Provisional screw for fixing the structure on the model
   
   
 

Application



Titanium bases, Raw‑Abutments® and Scanmarkers can be fixed onto the implant using the Abutment Screw Metal. On full-contour zirconia abutments, screws with flat seating must be used, in order to avoid tensions in the zirconia which, in the worst case, can lead to cracks in the abutment.